Home Assistant Connect ZBT-2 Zigbee and Thread USB adapter
Home Assistant Connect ZBT-2 Zigbee and Thread USB adapter
Home Assistant Connect ZBT-2 with external antenna
R 1,199.00
On order — ships in 1–3 weeks
⚠️ Back-order: This item is available for pre-order. Stock is on order — expected delivery within 1–3 weeks.
R 1,199.00 Home Assistant Connect ZBT-2 …

⭐ The Next-Gen Zigbee & Thread Adapter for Home Assistant

The official Home Assistant Connect ZBT-2 is a USB-C radio for Zigbee 3.0 and Thread (Matter-ready). Built on the Silicon Labs EFR32MG24 chip with a high-gain external antenna, it is faster and longer-range than the ZBT-1 and works plug-and-play with Home Assistant.

🚚
Free Delivery
Orders over R2,500
🇿🇦
Local Support
Gauteng based
🛡️
Warranty
Manufacturer

✨ What Makes This Special

  • Silicon Labs EFR32MG24 — improved sensitivity and speed over the previous generation
  • High-gain external antenna — better range and reliability, with coverage tested beyond 90 m (300+ ft)
  • Zigbee 3.0 and Thread / Matter — one adapter, two protocols (one at a time)
  • Plug-and-play setup — works with Home Assistant ZHA, Zigbee2MQTT and OpenThread Border Router
  • 460800 baud — 4× the serial speed of the ZBT-1 (115200 baud)
  • Open hardware — no glue, can be disassembled, exposed pins and open-source firmware
  • USB-C connection — plug straight into your Home Assistant server, Raspberry Pi or mini PC
💡 Best for: Home Assistant users who want a reliable, upgrade-friendly Zigbee coordinator today and a Thread / Matter radio for tomorrow. Use a short USB extension cable to move it away from the server and USB 3.0 ports for the best range.

🏆 Why Buy from Eiferer?

🇿🇦

Local SA Supplier

Ships from Gauteng

💰

Best Prices

Competitive guaranteed

🧑‍🔧

Expert Support

Call Jesse: 071 678 8719

🚚

Fast Shipping

Nationwide delivery

🧠 Works With

🔗 Supported Platforms

Plug-and-play with Home Assistant. Choose Zigbee or Thread firmware depending on how you want to use it.

🧠 Home Assistant (ZHA)📡 Zigbee2MQTT🧵 OpenThread Border Router✅ Matter over Thread

🎯 Key Features

📡

Better Range & Sensitivity

The MG24 radio paired with a high-gain external antenna gives stronger, more reliable links to your Zigbee devices, even through walls and across larger homes.

⚡

4× Faster Serial Link

A 460800 baud connection (vs 115200 on the ZBT-1) keeps busy networks responsive and gives headroom for larger meshes.

🔄

Zigbee or Thread

Run it as a Zigbee 3.0 coordinator, or switch the firmware to Thread to act as a Matter-ready border router radio. Note: Zigbee and Thread cannot run at the same time on this adapter.

🔓

Open & Hackable

Open hardware and open-source firmware. No glue, easy to open, exposed pins for tinkerers and developers.

⚠️ Good to know: Zigbee and Thread/Matter are supported but not simultaneously on this adapter. If you need both at once, use a dedicated adapter for each protocol.

📋 Technical Specifications

Model Home Assistant Connect ZBT-2
Chip Silicon Labs EFR32MG24
Protocols Zigbee 3.0, Thread (Matter-ready) — not simultaneously
Connection USB-C
MCU 78 MHz
RAM 256 KB
Flash 1536 KB
Antenna High-gain external
Baud Rate 460800
Supported Platforms Home Assistant (ZHA), Zigbee2MQTT, OpenThread Border Router
Hardware Open hardware, open-source firmware, no glue

🔗 Related Products

❓ Frequently Asked Questions

What is the difference between the ZBT-2 and ZBT-1?
The ZBT-2 uses the newer EFR32MG24 chip with better sensitivity and speed, a high-gain external antenna for longer range, and a 460800 baud serial link (4× faster than the ZBT-1).
Can I run Zigbee and Thread at the same time?
No. The ZBT-2 supports both Zigbee 3.0 and Thread (Matter-ready), but only one protocol at a time. You choose the firmware that suits your setup.
Does it work with Zigbee2MQTT?
Yes. It works with Home Assistant ZHA, Zigbee2MQTT and the OpenThread Border Router.
Do I need Home Assistant?
It is designed for Home Assistant and is plug-and-play there, but it can also be used with Zigbee2MQTT. Don't have a server yet? See our Home Assistant Mini Server.
How do I get the best range?
Keep the adapter away from USB 3.0 ports and metal enclosures, and use a short USB extension cable so it sits clear of the server. Mount it as high and as central as practical.

🤝 Need Help? We're Here for You!

🏢

Visit Us

8 Wildebraam Street
Weltevreden Park, Roodepoort
Gauteng, 1709

📧

Email

info@eiferer.co.za

🇿🇦

SA Supplier

Local Support

📡

Zigbee + Thread

Matter-Ready

🛡️

Warranty

Manufacturer

🚚

Fast Shipping

Nationwide

Zigbee 3.0 and Thread. One Adapter.

EFR32MG24 · USB-C · High-Gain Antenna · 460800 Baud · Open Hardware

Free Delivery Over R2,500 · Local SA Support