🔌
R 299.00R 399.00Save R 100.00
In Stock — 27 available

🌈 WS2812B Addressable RGB LED Strip — 60 LEDs/m, IP20 (Indoor, 5 Metres / 300 LEDs)

A full 5-metre roll of individually addressable WS2812B RGB LED strip with 60 LEDs per metre (300 LEDs total). Each LED can display a different colour simultaneously — perfect for custom lighting effects, animations, colour chasing, rainbows, and more. IP20 rated (no waterproof coating) for indoor use. DC 5V powered. Compatible with Arduino, ESP8266, ESP32, Raspberry Pi, WLED, ESPHome, Home Assistant, and any WS2812-compatible controller.

🚚
Free Delivery
Orders over R2,500
🇿🇦
Local Stock
Ships from Gauteng
🌈
300 LEDs
5 m × 60 LEDs/m
⚡
DC 5V
Low Voltage

⚡ Key Features

  • WS2812B Individually Addressable — each of the 60 LEDs can display a unique colour; create animations, colour chasing, fire effects, rainbows, and custom patterns
  • 60 LEDs Per Metre — high LED density for smooth, vivid lighting effects without visible gaps between pixels
  • Full RGB (16 Million Colours) — each LED contains red, green, and blue sub-pixels controlled via a single data line
  • DC 5V Input — powered by standard 5V USB or DC power supply; safe low-voltage operation
  • IP20 (Indoor) — no waterproof coating; flexible PCB for easy bending around corners and mounting in shelves, cabinets, and PC cases
  • Single Data Line — only 3 wires needed: 5V, GND, and Data In (DIN); chain multiple strips together
  • Cuttable — cut between any LED at the marked cut lines to create custom lengths
  • Self-Adhesive Backing — 3M adhesive tape on the back for easy peel-and-stick mounting

🏠 Perfect For

💻

WLED & Home Assistant

Flash WLED onto an ESP8266 or ESP32, connect the data line, and get app-controlled addressable lighting with 100+ effects. Full Home Assistant integration via ESPHome or WLED.

🎮

Gaming & PC Builds

Ambient backlighting for monitors, PC cases, and gaming desks. Individually addressable LEDs sync with games, music, or screen content via software like Hyperion or Prismatik.

🏡

Shelf & Cabinet Lighting

Mount under shelves, inside display cabinets, or behind TVs. Create mood lighting, accent colours, or dynamic effects controlled from your phone.

🔧

Arduino & Maker Projects

The go-to LED strip for electronics projects. Libraries like FastLED and Adafruit NeoPixel make programming effects easy on Arduino, ESP32, and Raspberry Pi.

💡 WLED Tip: Pair this 5 m strip with an ESP8266 or ESP32 board (R50–R100) and flash WLED firmware. You'll get a free smartphone app with 100+ built-in effects, colour palette control, and full Home Assistant integration. Total cost: under R500 for a stunning 5-metre smart LED setup.
⚠️ Power supply not included. Each LED draws up to 60 mA at full white. The full 5 m strip (300 LEDs) at full brightness needs approximately 18A @ 5V (90W). In practice, 5V 10A (50W) is sufficient for typical use. Use a quality 5V power supply and inject power at both ends (and ideally the middle) to avoid voltage drop and colour distortion.

📋 Technical Specifications

Product WS2812B Addressable RGB LED Strip
MPN / Model WS2812B
LED Chip WS2812B (integrated driver + RGB LED)
LEDs Per Metre 60
Total LEDs 300 (5 m × 60 LEDs/m)
Strip Length 5 metres
Colour Full RGB — 16 million colours, individually addressable
Input Voltage DC 5V
Power Per LED ~60 mA max (full white) · ~20 mA per colour channel
Data Protocol Single-wire (NZR), 800 Kbps
Wiring 3 wires: 5V · GND · DIN (Data In)
IP Rating IP20 (indoor, no waterproof coating)
PCB Width ~10 mm (flexible, white or black PCB)
Adhesive 3M self-adhesive backing
Cuttable Yes — cut at marked lines between any LED
Compatible Controllers Arduino · ESP8266 · ESP32 · Raspberry Pi · WLED · ESPHome · any WS2812-compatible controller
Warranty 1 Year Manufacturer Warranty

❓ Frequently Asked Questions

What controller do I need?
Any microcontroller with a digital output pin: Arduino Nano/Uno, ESP8266 (D1 Mini), ESP32, Raspberry Pi, etc. For the easiest setup, flash WLED onto an ESP8266/ESP32 — it gives you a smartphone app with 100+ effects out of the box. For Home Assistant, use ESPHome with the addressable LED component.
What power supply do I need?
A 5V DC power supply. Calculate: 300 LEDs × 60 mA = 18A max at full white. In practice, you rarely run full white — a 5V 10A (50W) supply is recommended for the full 5 m roll. Inject power at both ends and ideally in the middle to prevent voltage drop and colour shifting on longer runs.
Can I use it outdoors?
No. This is IP20 — no waterproof coating. It's for indoor use only. For outdoor applications, look for WS2812B strips with IP65 (silicone coated) or IP67 (silicone tube) ratings.
Can I cut it to a shorter length?
Yes. Cut at the marked lines between any two LEDs. Each LED segment works independently. You can also solder wires to reconnect cut sections at a different angle or length.
Does it work with Home Assistant?
Yes — via WLED (discovered automatically) or ESPHome (addressable LED platform). Both provide full control of colours, effects, brightness, and automation from within Home Assistant.

🤝 Need Help? We're Here for You!

📞

Call Us

Jesse: 071 678 8719
Jason: 084 505 7481

🏢

Visit Us

8 Wildebraam Street
Weltevreden Park, Roodepoort
Gauteng, 1709

📧

Email

[email protected]

Every LE