🔌 Micro USB Data Cable — 2.0 Metre

A 2-metre Micro USB cable for powering and programming your smart home devices, Zigbee dongles, cameras, and DIY electronics. Data + charging capable — USB 2.0 Type-A to Micro USB-B. The extra length makes it easy to reach wall outlets, USB hubs, or laptops from wherever your device is installed.

🚚

Free Delivery

Orders over R2,500

🇿🇦

Local Stock

Ships from Gauteng

💰

Only R60

Budget Accessory

📏

2 Metres

Extra Long

⚡ Key Features

USB 2.0 Data + Charging — supports both data transfer and power delivery; not a charge-only cable
2 Metre Length — extra long for flexible placement of cameras, sensors, hubs, and DIY modules
Type-A to Micro USB-B — standard Micro USB connector compatible with most smart home devices, Zigbee dongles, older SONOFF products, and more
Reliable Connection — suitable for powering always-on devices like security cameras, USB-powered hubs, and sensors

🏠 Compatible With

📷

Security Cameras

Power SONOFF and eWeLink cameras that use Micro USB. The 2 m length helps route the cable neatly from camera to power adapter.

🔧

Zigbee Dongles & Hubs

Connect Zigbee USB dongles (ZBDongle-E, ConBee, etc.) to your PC, Raspberry Pi, or USB power supply.

📱

Smart Home Devices

Power or flash SONOFF devices, ESP8266/ESP32 modules, and other Micro USB smart home hardware.

💻

General Use

Charge and sync phones, tablets, e-readers, controllers, and any device with a Micro USB port.

💡 Tip: Check your device's connector before ordering. Many newer SONOFF products (2024+) use USB-C. This cable is Micro USB — the smaller, older-style connector used on devices like the SONOFF Basic R2, SONOFF SV, Zigbee Bridge, and many cameras.

📋 Technical Specifications

Product	Micro USB Data Cable
Connector A	USB 2.0 Type-A (standard USB)
Connector B	Micro USB-B
Cable Length	2.0 metres
Data Transfer	Yes — USB 2.0 (480 Mbps max)
Power Delivery	Yes — charging + data
Warranty	1 Year Manufacturer Warranty

❓ Frequently Asked Questions

Is this a data cable or charge-only?

Data + charging. This is a full USB 2.0 data cable — it supports both data transfer and power delivery. You can use it to flash firmware, sync devices, or power them.

Will it work with the SONOFF ZBDongle-E?

The ZBDongle-E uses a USB-A plug (it plugs directly into a USB port). This cable is not needed for the dongle itself, but it can be used to power devices connected via Micro USB, such as a Raspberry Pi running Home Assistant.

Is it USB-C?

No. This is a Micro USB cable (the smaller, older-style connector). If your device has a USB-C port, you need a USB-C cable instead.