SONOFF T2EU-RF — 433MHz Wireless Wall Panel Remote (1/2/3 Gang)
SONOFF T2EU-RF — 433MHz Wireless Wall Panel Remote (1/2/3 Gang)
SONOFF T2EU-RF — 433MHz Wireless Wall Panel Remote (1/2/3 Gang)
SONOFF T2EU-RF — 433MHz Wireless Wall Panel Remote (1/2/3 Gang)
SONOFF T2EU-RF — 433MHz Wireless Wall Panel Remote (1/2/3 Gang)
R 99.00R 109.00Save R 10.00
Low Stock — Only 1 left

🔘 SONOFF T2EU-RF — 433MHz Wireless Stick-On Wall Panel Remote (1/2/3 Gang)

A wireless 433MHz RF remote controller disguised as a sleek wall switch. The T2EU-RF matches the design of the SONOFF TX-series touch switches — toughened glass panel, touch buttons, and LED backlight — but requires no wiring. Simply stick it on the wall with 3M adhesive and pair it with your SONOFF RF-compatible devices. Perfect for adding a second switch point in hallways, bedrooms, and stairways without running new cables.

🚚
Free Delivery
Orders over R2,500
🇿🇦
Local Stock
Ships from Gauteng
📡
433MHz RF
No WiFi Needed
🔘
1 / 2 / 3 Gang
Variants Available

⚡ Key Features

  • Looks Like a Real Wall Switch — toughened glass panel with sensitive touch buttons and LED backlight; indistinguishable from the SONOFF TX-series wired switches
  • No Wiring Required — battery powered; stick on any wall with included 3M adhesive; no electrician needed
  • 1, 2, or 3 Gang Variants — choose the number of buttons to match how many lights or devices you want to control
  • 433MHz RF Protocol — pairs directly with SONOFF RF-compatible devices: T1/T2/T3 wall switches, RFR2, RFR3, 4CHPROR3, SlampherR2, iFan04, and more
  • Two-Way Control — add it as a second switch point for any existing SONOFF TX wall switch; creates a wireless two-way switching setup without rewiring
  • One-to-Many / Many-to-One — one remote can control multiple devices, or multiple remotes can control one device; flexible pairing
  • Adjustable LED Backlight — the touch button glows in the dark for easy location at night; brightness adjusts based on ambient light
💡 Two-Way Switching Without Rewiring: Need a light switch at both ends of a hallway? Install a SONOFF T2 (wired) at one end. Stick a T2EU-RF (wireless) at the other end. Pair them. Now you have two-way control of the same light — no chasing cables through walls. The wireless remote looks identical to the wired switch.

🏠 Where to Use It

🚪

Hallway Two-Way

Wired switch at one end, wireless T2EU-RF at the other. Control the hallway light from either point — no rewiring needed.

🛏️

Bedside Switch

Stick it on the wall next to your bed. Control the bedroom ceiling light without getting up. Looks like a proper wall switch, not a remote.

🪜

Stairway Control

Add a switch point at the top or bottom of stairs. No need to run new cables between floors.

🏗️

Renovation-Free

Adding a switch point in an existing room normally means chasing walls and running cable. The T2EU-RF eliminates all of that — just stick and pair.

📋 Technical Specifications

Model T2EU-RF (1C / 2C / 3C)
Type 433MHz RF wireless wall panel remote
Form Factor 86-type (EU square)
Panel Toughened glass
Buttons 1, 2, or 3 gang (touch)
LED Backlight Yes (brightness auto-adjusts)
Frequency 433MHz RF
Power Battery (CR2032 × 2, not included)
Mounting 3M adhesive (stick-on, no wiring)
Compatible Devices SONOFF T1/T2/T3 switches, RFR2, RFR3, 4CHPROR3, SlampherR2, iFan04

🔋 Variant Pricing

1 Gang: R99 (was R179) · 2 Gang: R99 (was R189) · 3 Gang: R99 (was R199, sold out)

Select your variant above the Add to Cart button on this page.

❓ Frequently Asked Questions

Is this a WiFi switch or a remote control?
It's a 433MHz RF remote control — not a WiFi switch. It looks identical to the TX-series wall switches, but it's battery-powered and wireless. It sends RF signals to paired SONOFF devices. It does not connect to WiFi or the eWeLink app directly.
What batteries does it use?
It uses 2× CR2032 coin cell batteries. Batteries are not included — you'll need to purchase them separately. CR2032 batteries are widely available at any Clicks, Dis-Chem, or hardware store.
Can I use it with the T6 TX Gen2 (Matter)?
The T6 TX Gen2 is a Matter/WiFi switch and does not have a 433MHz RF receiver. The T2EU-RF only works with SONOFF switches that have built-in 433MHz RF support (T1, T2, T3 series). Check your switch model before purchasing.
Will it work during load shedding?
The remote itself is battery-powered, so yes — it will send the RF signal. However, the receiving device (the wired SONOFF switch) needs mains power to respond. If the power is off, the switch can't toggle the light regardless of the remote.

🤝 Need Help? We're Here for You!

🏢

Visit Us

8 Wildebraam Street
Weltevreden Park, Roodepoort
Gauteng, 1709

📧

Email

info@eiferer.co.za

Add a Switch Anywhere. No Wires. No Electrician.

SONOFF T2EU-RF — 433MHz wireless wall panel remote · Glass touch · LED backlight · From R99